Chun caidéal suiteáilte a ghlanadh, lean an nós imeachta múchta caidéil:

Chun caidéal suiteáilte a ghlanadh, lean an nós imeachta múchta caidéil:

1. Remove all water cooling lines and cut off the primary circuit power supply to the pump heater. 2. Release all pump oil. 3. Unscrew the inlet and front pipe connection bolts and remove the pump from the system. 4. Remove the water cooling cap (if applicable). 5. Remove the nozzle assembly in accordance with the method described in the operation manual of the specific pump model. 6. Carefully clean the inside of the pump body with acetone and flush with isopropyl alcohol. The pump is then blown dry with clean, dry, oil-free compressed air. 7. Carefully clean nozzle assembly with acetone. Wipe all surfaces with isopropyl alcohol and blow dry them with clean, dry, oil-free compressed air. 8. Reinstall the nozzle and water cooling cap to the pump body. Make sure the nozzle is properly aligned with the front stage system (if applicable). 9. Check the condition of o-rings. Replace o-rings that show any signs of aging or compression. 10. Connect the pump to the system.

Rabhadh:
Ná húsáid gar d'fhoinse ardteochta. Aeráil an limistéar oibre le gaothrán agus úsáid caidéal idirleata i seomra mór aeráilte. Is féidir gaireas análaithe ar leith a úsáid freisin más gá.
Cinntigh i gcónaí go ndéantar oibríochtaí glantacháin i seomra mór atá aeráilte go maith. Caith gloiní cosanta, lámhainní agus éadaí cosanta.

Cuideachta IKS PVD, meaisín brataithe maisiúil, meaisín brataithe uirlisí, meaisín brataithe DLC, meaisín sciath optúil, líne sciath folúis PVD, tá an tionscadal cas-eochair ar fáil. Déan teagmháil linn anois, R-phost:iks.pvd@foxmail.com